View MASW-000834-13560T_4508285.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications
Features
* * * * * * * *
Exceptional Broadband Performance, 0.05 - 6.0 GHz Low Loss: TX = 0.33 dB @ 2010 MHz, 5V / 20mA Low Loss: TX = 0.38 dB @ 3.5 GHz, 5V / 20mA High Isolation: Rx = 44dB @ 2010 MHz, 20mA / 5V High Isolation: Rx = 36dB @ 3.5 GHz, 20mA / 5V High TX RF Input Power = 50 W C.W. @ 2010MHz High Tx RF Input Peak Power > 1000 W Suitable for Very High Power TD-SCDMA & WiMAX Applications * Surface Mount 4mm PQFN Package, RoHS* Compliant
Rev. V5
Functional Diagram (TOP VIEW)
Description and Applications
The MA-COM MASW-000834-13560T is a SPDT Broadband, high linearity, common anode, PIN diode T/R switch for 0.05 - 6.0 GHz applications, including WiMAX & WiFi. The device is provided in industry standard 4mm PQFN plastic packaging. This device incorporates a PIN diode die fabricated with M/A-COM's patented SiliconGlass HMICTM process. This chip features two silicon pedestals embedded in a low loss, low dispersion glass. The diodes are formed on the top of each pedestal. The topside is fully encapsulated with silicon nitride and has an additional polymer passivation layer. These polymer protective coatings prevent damage and contamination during handling and assembly. This compact 4mm PQFN package, SPDT switch offers wideband 0.05 - 6.0 GHz performance with excellent isolation to loss ratio for both TX and RX states. The PIN diode provides exceptional 50 W C.W. power handling and 65 dBm IIP3 at 2010 MHz for maximum switch performance.
Pin Configuration:
(Center Metal Area is RF, D.C., and Thermal Ground) Pin
1 2 3 4 5 6 7 8
Function
GND ANT GND N/C N/C GND RX GND
Pin
9 10 11 12 13 14 15 16
Function
DC2 N/C DC1 N/C GND TX GND N/C
Absolute Maximum Ratings 1
@ TA = +25 C (unless otherwise specified) Parameter
Forward Current Reverse Voltage ( RF & D.C. ) Operating Temperature Storage Temperature Junction Temperature TX Incident C.W. Power TX Peak Incident Power
Absolute Maximum
| 100 mA | | -200 V | -40 C to +85 C -55 C to +150 C +175 C 50W (47 dBm) @ 2010MHz
2
Ordering Information
Part Number
MASW-000834-13560T MASW-000834-001SMB MADR-008851-0001TB
Package
Tape and Reel Sample Board Sample Board with recommended external Driver & MASW-00083413560T Switch
>300 W, 5us, 1% duty
Static Sensitivity
These devices are rated Class 1B Human Body. Proper ESD control techniques should be used when handling these devices.
* North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
1
1. Exceeding these limits may cause permanent damage. 2. Baseplate Temperature must be controlled to a constant 25C. See page 7 for derating curve. * Restrictions on Hazardous Substances, European Union Directive
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications
Electrical Specifications at +25C, Characteristic Impedance, 20mA / 5V, Z0 = 50
Parameter
F = 900 MHz Insertion Loss, RX Insertion Loss, TX Isolation, TX To RX Isolation, RX To TX F = 1800 MHz Insertion Loss, RX Insertion Loss, TX Isolation, TX To RX Isolation, RX To TX F = 2010 MHz Insertion Loss, RX Insertion Loss, TX Isolation, TX To RX Isolation, RX To TX Input Return Loss, TX Input Return Loss, RX RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm dB dB dB dB dB dB -- -- 43.2 17.7 -- -- 0.42 0.33 44.6 19.9 32.1 24.2 0.75 0.5 -- -- -- -- RX IL Tx IL Rx ISO TX ISO See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm dB dB dB dB -- -- 43.7 18.4 0.40 0.32 48.9 21.4 0.72 0.49 -- RX IL TX IL RX ISO TX ISO See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm dB dB dB dB -- -- 45.8 21.7 0.34 0.26 52.1 27.1 0.56 0.445 -- --
Rev. V5
Symbol
20mA / 5V Conditions
Units
Min.
Typ.
Max.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
* North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications
Electrical Specifications at +25C, Characteristic Impedance, 20mA / 5V, Z0 = 50
Parameter F = 2.3-2.7 GHz Insertion Loss, RX Insertion Loss, TX Isolation, TX To RX Isolation, RX To TX Input Return Loss, TX Input Return Loss, RX F = 3.3-3.8 GHz Insertion Loss, RX Insertion Loss, TX Isolation, TX To RX Isolation, RX To TX Input Return Loss, TX Input Return Loss, RX F = 4.9-5.9 GHz Insertion Loss, RX Insertion Loss, TX Isolation, TX To RX Isolation, RX To TX Input Return Loss, TX Input Return Loss, RX RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm dB dB dB dB dB dB -- -- -- -- -- -- 0.78 0.52 26.4 11.8 20.3 24.2 -- -- -- -- -- -- RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm dB dB dB dB dB dB -- -- 33.7 13.6 -- -- 0.56 0.38 35.9 16.1 27.4 21.9 1.0 0.575 -- -- -- -- RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm See Bias Table 1, pg. 10, Pinc= 0 dBm dB dB dB dB dB dB -- -- 40.2 16.2 -- -- 0.46 0.35 41.2 18.6 30.5 22.9 0.84 0.525 -- -- -- -- Symbol 20mA / 5V Conditions Units Min. Typ. Max.
Rev. V5
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
* North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications
Electrical Specifications at +25C, Characteristic Impedance, 50mA / 25V, Z0 = 50
Parameter F = 900 MHz Insertion Loss, RX Insertion Loss, TX Isolation, TX To RX Isolation, RX To TX F = 1800 MHz Insertion Loss, RX Insertion Loss, TX Isolation, TX To RX Isolation, RX To TX F = 2010 MHz Insertion Loss, RX Insertion Loss, TX Isolation, TX To RX Isolation, RX To TX Input Return Loss, TX Input Return Loss, RX RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm dB dB dB dB dB dB -- -- -- -- -- -- 0.34 0.28 45.5 20.1 33.1 24.1 -- -- -- -- -- -- RX IL TX IL RX ISO TX ISO See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm dB dB dB dB -- -- -- -- 0.32 0.27 50.2 21.6 -- -- -- -- RX IL TX IL RX ISO TX ISO See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm dB dB dB dB -- -- -- -- 0.27 0.22 53.3 27.4 -- -- -- -- Symbol 50mA / 25V Conditions Units Min. Typ. Max.
Rev. V5
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
* North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications
Electrical Specifications at +25C, Characteristic Impedance, 50mA / 25V, Z0 = 50
Parameter
F = 2.3-2.7 GHz Insertion Loss, RX Insertion Loss, TX Isolation, TX To RX Isolation, RX To TX Input Return Loss, TX Input Return Loss, RX F = 3.3-3.8 GHz Insertion Loss, RX Insertion Loss, TX Isolation, TX To RX Isolation, RX To TX Input Return Loss, TX Input Return Loss, RX F = 4.9-5.9 GHz Insertion Loss, RX Insertion Loss, TX Isolation, TX To RX Isolation, RX To TX Input Return Loss, TX Input Return Loss, RX RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm dB dB dB dB dB dB -- -- -- -- -- -- 0.72 0.48 26.6 11.8 20.5 24.2 -- -- -- -- -- -- RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm dB dB dB dB dB dB -- -- -- -- -- -- 0.47 0.33 36.2 16.2 28.0 21.8 -- -- -- -- -- -- RX IL TX IL RX ISO TX ISO TX RL RX RL See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm See Bias Table 2, pg. 10, Pinc= 0 dBm dB dB dB dB dB dB -- -- -- -- -- -- 0.38 0.30 41.8 18.7 31.3 22.8 -- -- -- -- -- --
Rev. V5
Symbol
50mA / 25V Conditions
Units
Min.
Typ.
Max.
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
* North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications
Electrical Specifications at +25C, Characteristic Impedance, 50mA / 25V, Z0 = 50
Parameter TX Input P1dB 2 TX 2nd Harmonic TX 3rd Harmonic TX Input Third Order Intercept Point TX C.W. Input Power
2
Rev. V5
Symbol TX P1dB TX 2Fo TX 3Fo TX IIP3 TX Pinc RX Pinc tRF
50mA / 25V Conditions 2010 MHz, TX to Antenna 2010 MHz, Pin = + 30 dBm 2010 MHz, Pin = + 30 dBm Pi= +10dBm, F1 = 2010 MHz, F2 = 2020 MHz F = 2010 MHz F = 2010 MHz F = 2010 MHz ( 10-90% RF Voltage) 1MHz Rep Rate in Modulating Mode
Units dBm dBc dBc dBm dBm W dBm W ns
Min. -- -- -- -- -- -- --
Typ. >45.5 80 95 >64 -- -- 200
Max. -- -- -- -- 47 50 41.5 14 --
RX C.W. Input Power TX RF Switching Speed
Parameter TX Input P1dB TX 2nd Harmonic TX 3rd Harmonic TX Input Third Order Intercept Point RX C.W. Input Power TX RF Switching Speed
Symbol TX IP1dB TX 2Fo TX 3Fo TX IIP3 RX Pinc tRF
50mA / 25V Conditions 3.5 GHz, TX to Antenna 3.5 GHz, Pin = + 30 dBm 3.5 GHz, Pin = + 30 dBm Pi= +10dBm, F1 = 3.500 GHz, F2 = 3.510 GHz F = 3.5 GHz F = 3.5 GHz ( 10-90% RF Voltage) 1MHz Rep Rate in Modulating Mode
Units dBm dBc dBc dBm dBm W ns
Min. -- -- -- -- -- --
Typ. >45 88 105 >64 -- 200
Max. -- -- -- -- 40.5 11 --
6
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
* North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications
Electrical Specifications at +25C, Characteristic Impedance, 50mA / 25V, Z0 = 50
Power Derating Curve, Tx Maximum C.W. Input Power
(50mA Forward Bias, 2010 MHz)
Rev. V5
55
Maximum C.W. Input Power (Watts )
50
45
40
35
30 25 45 65 85
Baseplate Temperature (Degrees C)
Note that this part must be held to a constant baseplate temperature to achieve the power handling results specified above. Adding a heatsink to the baseplate will improve performance to values greater than shown here. The increase in maximum input power from using a heatsink depends on the specific heatsink design. With a sample board mounted onto a heatsink of dimensions and fins shown below, this switch can handle up to 35 Watts C.W. of incident power.
7
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
* North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications
TX Performance Curves at +25C, Characteristic Impedance, Z0 = 50
Rev. V5
8
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
* North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications
RX Performance Curves at +25C, Characteristic Impedance, Z0 = 50
Rev. V5
9
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
* North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications
Bias Diagrams & Tables TX-ANT Insertion Loss RX-ANT Isolation RX-ANT Insertion Loss TX-ANT Isolation
Rev. V5
Bias Table 1 Pin TX-ANT Isolation TX-ANT Insertion Loss RX-ANT Isolation RX-ANT Insertion Loss
TX Pin 14 +5V, 0 mA -20 mA -20 mA +5V, 0 mA
RX Pin 7 -20 mA +5V, 0 mA +5V, 0 mA -20 mA
DC2 Pin 9 +5V, 0 mA -20 mA -20 mA +5V, 0 mA
ANT Pin 2 0V 0V 0V 0V
Bias Table 2 Pin TX-ANT Isolation TX-ANT Insertion Loss RX-ANT Isolation RX-ANT Insertion Loss
TX Pin 14 +25V, 0 mA -50 mA -50 mA +25V, 0 mA
RX Pin 7 -50 mA +25V, 0 mA +25V, 0 mA -50 mA
DC2 Pin 9 +25V, 0 mA -50 mA -50 mA +25V, 0 mA
ANT Pin 2 0V 0V 0V 0V
10
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
* North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications
MASW-000834-13560T Outline - 4mm PQFN 16-Lead Saw Singulated
Rev. V5
Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements.
11
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
* North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for 0.05 - 6.0 GHz Higher Power Applications
MASW-000834 and Recommended Driver with +5V & +28V DC Power
ANT
Rev. V5
MADR-008851 is the recommended driver for the MASW-000834 Switch. Link to MADR-008851 Datasheet
C3 27 pF 100V
L1 27 nH C4 1000 pF
R1 See Note 9 +5V C5 0.022 uF
TX Voltage
TX C1 27 pF 100V SPDT
RX Voltage
RX C2 27 pF 100V
L2 27 nH +28V +5V
L3 27 nH
C8 20 pF Note 11 L4 27 nH
C6 12 pF TX RX Logic Input C1 SH2 MADR-008851-000100 Switch Driver SH1 R2 See Note 10
C7 12 pF
SH Current
Ground
8. 9. 10. 11. 12. 13. 14. 15.
Forward Bias Diode Voltage: Vf is ~0.9V @ 22 mA; Vf is ~1.0V @ 35 mA R1 is calculated by (Vcc-1.5V)/Iseries, where Iseries is the desired bias current for the series diodes. For 21 mA load current, R1 = 165 @ VCC = 5.0V and 82 @ VCC = 3.3V. For 32 mA load current, R1 = 110 @ VCC = 5.0V and 56 @ VCC= 3.3V. R2 is calculated by (Vdd-1V)/Ishunt, where Ishunt is the desired forward bias current for the shunt diode. The power dissipation is calculated by Ishunt x 27V. For 20 mA of Ishunt, R2 should use a 2511, 1W, 1.3k ohm resistor. C8 is already built-in for M/A-COM MASW-000834-13560T switch. The voltage at the common anode will be approximately 1.5V. The current in through the back-biased diodes will be the leakage current for the diodes C1-C5, L1-L4, R1, R2, and the switch are discrete components that should be installed on the user's board. It is recommended that Coilcraft 0603CS-27NXJLW or equivalent be used for L1-L4 at 2 GHz (values may vary based on the frequency). There are 33 pF bypass capacitors included in the driver for the RX, TX, and SH1 ports. There are cases, especially at higher frequencies, where the optional 12 pF bypass capacitors (C6 and C7) that are shown on the schematic are needed.
12
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed.
* North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

▲Up To Search▲

Price & Availability of MASW-000834-13560T

	To Download MASW-000834-13560T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .